Kandu.dk - Huawei 220 telmore debian testing, hjælp til pppd.


/ Forside / Teknologi / Operativsystemer / Linux / Nyhedsindlæg

Glemt dit kodeord?

Brugernavn*

Kodeord *

Husk mig

Brugerservice

Kom godt i gang

Bliv medlem

Seneste indlæg

Find en bruger

Stil et spørgsmål

Skriv et tip

Fortæl en ven

Pointsystemet

Kontakt Kandu.dk

Emnevisning

Kategorier

Alfabetisk

Karriere

Interesser

Teknologi

Reklame

Top 10 brugere

Linux

#	Navn	Point
1	o.v.n.	11177
2	peque	7911
3	dk	4814
4	e.c	2359
5	Uranus	1334
6	emesen	1334
7	stone47	1307
8	linuxrules	1214
9	Octon	1100
10	BjarneD	875

Huawei 220 telmore debian testing, hjælp t~
Fra : bofhenator@gmail.com

Dato : 01-04-08 14:30

Jeg er en anelse på bar bund, jeg starter pppd således:

pppd call h3g.chat

Jeg har følgende filer:
/etc/ppp/peers/h3g.chat:
lock
connect "/usr/sbin/chat -v -f /etc/ppp/h3g.chat"
#Use the first of the serial ports.
/dev/ttyUSB0
hide-password
noauth
debug
novj
460800
#This options tells pppd to create automatically a default route for
this connection
#in the routing table upon connection.
#This works if you do not have set (you must not indeed!) the
'gateway' option
# for any network interface you have (eg eth0).
defaultroute
noipdefault
user anyuser
password anypassword
modem
crtscts
#Do not use the peer given DNSs, since the ones received from the peer
are wrong. Vi prøver!
usepeerdns
nodeflate
nobsdcomp

og /etc/ppp/h3g.chat
ABORT BUSY
ABORT ERROR
REPORT CONNECT
TIMEOUT 10
"" "AT&F"
OK "AT+COPS?"
#This is to be sure of being connected to HSDPA of Tre and not anyone
else ('roaming' costs too much!).
#'+COPS: 0,0,"3 Italy",2' "ATZ"
OK "ATE1"
OK "ATS0=0"
OK 'AT+CGDCONT=1,"IP"'
OK "ATDT*99#"
TIMEOUT 30
CONNECT \d\c

Jeg ender med at pppd dør:Apr 1 22:22:54 Pedersen-hp pppd[11431]:
pppd 2.4.4 started by root, uid 0
Apr 1 22:22:55 Pedersen-hp chat[11432]: abort on (BUSY)
Apr 1 22:22:55 Pedersen-hp chat[11432]: abort on (ERROR)
Apr 1 22:22:55 Pedersen-hp chat[11432]: report (CONNECT)
Apr 1 22:22:55 Pedersen-hp chat[11432]: timeout set to 10 seconds
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (AT&F^M)
Apr 1 22:22:55 Pedersen-hp chat[11432]: expect (OK)
Apr 1 22:22:55 Pedersen-hp chat[11432]: AT&F^M^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: OK
Apr 1 22:22:55 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (AT+COPS?^M)
Apr 1 22:22:55 Pedersen-hp chat[11432]: expect (OK)
Apr 1 22:22:55 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: AT+COPS?^M^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: +COPS: 0,0,"TELMORE",2^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: OK
Apr 1 22:22:55 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (ATE1^M)
Apr 1 22:22:55 Pedersen-hp chat[11432]: expect (OK)
Apr 1 22:22:55 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: ATE1^M^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: OK
Apr 1 22:22:55 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (ATS0=0^M)
Apr 1 22:22:55 Pedersen-hp chat[11432]: expect (OK)
Apr 1 22:22:55 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: ATS0=0^M^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: OK
Apr 1 22:22:55 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (AT+CGDCONT=1,"IP"^M)
Apr 1 22:22:55 Pedersen-hp chat[11432]: expect (OK)
Apr 1 22:22:55 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: AT+CGDCONT=1,"IP"^M^M
Apr 1 22:22:55 Pedersen-hp chat[11432]: OK
Apr 1 22:22:55 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:55 Pedersen-hp chat[11432]: send (ATDT*99#^M)
Apr 1 22:22:56 Pedersen-hp chat[11432]: timeout set to 30 seconds
Apr 1 22:22:56 Pedersen-hp chat[11432]: expect (CONNECT)
Apr 1 22:22:56 Pedersen-hp chat[11432]: ^M
Apr 1 22:22:56 Pedersen-hp chat[11432]: ATDT*99#^M^M
Apr 1 22:22:56 Pedersen-hp chat[11432]: CONNECT
Apr 1 22:22:56 Pedersen-hp chat[11432]: -- got it
Apr 1 22:22:56 Pedersen-hp chat[11432]: send (\d)
Apr 1 22:22:57 Pedersen-hp pppd[11431]: Serial connection
established.
Apr 1 22:22:57 Pedersen-hp pppd[11431]: using channel 4
Apr 1 22:22:57 Pedersen-hp pppd[11431]: Using interface ppp0
Apr 1 22:22:57 Pedersen-hp pppd[11431]: Connect: ppp0 <--> /dev/
ttyUSB0
Apr 1 22:22:58 Pedersen-hp pppd[11431]: sent [LCP ConfReq id=0x1
<asyncmap 0x0> <magic 0x463c9329> <pcomp> <accomp>]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [LCP ConfReq id=0xb
<asyncmap 0x0> <auth chap MD5> <magic 0x104551b> <pcomp> <accomp>]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: sent [LCP ConfAck id=0xb
<asyncmap 0x0> <auth chap MD5> <magic 0x104551b> <pcomp> <accomp>]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [LCP ConfAck id=0x1
<asyncmap 0x0> <magic 0x463c9329> <pcomp> <accomp>]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: sent [LCP EchoReq id=0x0
magic=0x463c9329]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [LCP DiscReq id=0xc
magic=0x104551b]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [CHAP Challenge id=0x1
<6e59e9939e90eebcf8d558d2aaf847c6>, name = "UMTS_CHAP_SRVR"]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: sent [CHAP Response id=0x1
<c8f4c0dce1ec161605567e5fd008811e>, name = "anyuser"]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [LCP EchoRep id=0x0
magic=0x104551b 46 3c 93 29]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: rcvd [CHAP Success id=0x1 ""]
Apr 1 22:22:58 Pedersen-hp pppd[11431]: CHAP authentication succeeded
Apr 1 22:22:58 Pedersen-hp pppd[11431]: CHAP authentication succeeded
Apr 1 22:22:58 Pedersen-hp pppd[11431]: sent [IPCP ConfReq id=0x1
<addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Apr 1 22:22:59 Pedersen-hp pppd[11431]: rcvd [IPCP ConfNak id=0x1 <ms-
dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins
10.11.12.14>]
Apr 1 22:22:59 Pedersen-hp pppd[11431]: sent [IPCP ConfReq id=0x2
<addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
Apr 1 22:22:59 Pedersen-hp pppd[11431]: Hangup (SIGHUP)
Apr 1 22:22:59 Pedersen-hp pppd[11431]: Modem hangup
Apr 1 22:22:59 Pedersen-hp pppd[11431]: Connection terminated.
Apr 1 22:23:00 Pedersen-hp pppd[11431]: Exit.

Nogle gode råd?

/Magnus

Jesper Staun Hansen (01-04-2008)

Kommentar
Fra : Jesper Staun Hansen

Dato : 01-04-08 21:44

bofhenator@gmail.com wrote:
> Jeg er en anelse på bar bund, jeg starter pppd således:
>
> pppd call h3g.chat
>
> Jeg har følgende filer:
> /etc/ppp/peers/h3g.chat:
> lock
> connect "/usr/sbin/chat -v -f /etc/ppp/h3g.chat"
> #Use the first of the serial ports.
> /dev/ttyUSB0
> hide-password
> noauth
> debug
> novj
> 460800
> #This options tells pppd to create automatically a default route for
> this connection
> #in the routing table upon connection.
> #This works if you do not have set (you must not indeed!) the
> 'gateway' option
> # for any network interface you have (eg eth0).
> defaultroute
> noipdefault
> user anyuser
> password anypassword
> modem
> crtscts
> #Do not use the peer given DNSs, since the ones received from the peer
> are wrong. Vi prøver!
> usepeerdns
> nodeflate
> nobsdcomp
>
> og /etc/ppp/h3g.chat
> ABORT BUSY
> ABORT ERROR
> REPORT CONNECT
> TIMEOUT 10
> "" "AT&F"
> OK "AT+COPS?"
> #This is to be sure of being connected to HSDPA of Tre and not anyone
> else ('roaming' costs too much!).
> #'+COPS: 0,0,"3 Italy",2' "ATZ"
> OK "ATE1"
> OK "ATS0=0"
> OK 'AT+CGDCONT=1,"IP"'
> OK "ATDT*99#"
> TIMEOUT 30
> CONNECT \d\c
>
<snip>
>
> Nogle gode råd?
>
> /Magnus

Muligvis din ATDT der er forkert.
Der findes nogle forskellige afhængig af teleudbyder.
Har selv denne (M1 på TDCs netværk):
# cat /etc/ppp/peers/BluetoothDialup
debug
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/BluetoothDialup"
usepeerdns
/dev/rfcomm0 115200
defaultroute
crtscts
lcp-echo-failure 0

# cat /etc/chatscripts/BluetoothDialup
TIMEOUT 35
ECHO ON
ABORT '\nBUSY\r'
ABORT '\nERROR\r'
ABORT '\nNO ANSWER\r'
ABORT '\nNO CARRIER\r'
ABORT '\nNO DIALTONE\r'
ABORT '\nRINGING\r\n\r\nRINGING\r'
'' \rAT
OK 'AT+CGDCONT=1,"IP","internet"'
OK ATD*99***1#
CONNECT ""

Tonni Aagesen (01-04-2008)

Kommentar
Fra : Tonni Aagesen

Dato : 01-04-08 22:42

bofhenator@gmail.com wrote:

> Nogle gode råd?

Følgende fungerede for mig med deres HUAWEI modem:

cello ~ # cat /etc/ppp/chat-tre
TIMEOUT 30
ECHO ON
ABORT '\nBUSY\r'
ABORT '\nERROR\r'
ABORT '\nNO ANSWER\r'
ABORT '\nNO DIALTONE\r'
ABORT '\nRINGING\r\n\r\nRINGING\r'
'' '\rATz'
OK '\rATE0V1&D2&C1S0=0+IFC=2,2'
OK '\rAT+cgdcont=1,"IP","bredband.tre.dk"'
OK '\rATD*99***1#'
CONNECT ''

cello ~ # cat /etc/ppp/peers/tre
connect '/usr/sbin/chat -v -f /etc/ppp/chat-tre'
noauth
defaultroute
usepeerdns
/dev/ttyUSB0
115200

--
Mvh
Tonni Aagesen

Magnus Pedersen (01-04-2008)

Kommentar
Fra : Magnus Pedersen

Dato : 01-04-08 22:54

Tonni Aagesen wrote:
> bofhenator@gmail.com wrote:
>
>> Nogle gode råd?
>
> Følgende fungerede for mig med deres HUAWEI modem:
>
> cello ~ # cat /etc/ppp/chat-tre
> TIMEOUT 30
> ECHO ON
> ABORT '\nBUSY\r'
> ABORT '\nERROR\r'
> ABORT '\nNO ANSWER\r'
> ABORT '\nNO DIALTONE\r'
> ABORT '\nRINGING\r\n\r\nRINGING\r'
> '' '\rATz'
> OK '\rATE0V1&D2&C1S0=0+IFC=2,2'
> OK '\rAT+cgdcont=1,"IP","bredband.tre.dk"'
> OK '\rATD*99***1#'
> CONNECT ''
>
> cello ~ # cat /etc/ppp/peers/tre
> connect '/usr/sbin/chat -v -f /etc/ppp/chat-tre'
> noauth
> defaultroute
> usepeerdns
> /dev/ttyUSB0
> 115200
>
>
Tak for input Glad

Hvis jeg sletter den sidste del "bredband.tre.dk" fra nedenstående
linie, mon det så ikke spiller med telmore Glad

OK '\rAT+cgdcont=1,"IP","bredband.tre.dk"'

/Magnus
Der nok skal melde tilbage hvis det virker Glad

bofhenator@gmail.com (03-04-2008)

Kommentar
Fra : bofhenator@gmail.com

Dato : 03-04-08 11:50

On Apr 1, 11:54 pm, Magnus Pedersen <bofhena...@gmail.com> wrote:
> Tonni Aagesen wrote:
> > bofhena...@gmail.com wrote:
>
> >> Nogle gode råd?
>
> > Følgende fungerede for mig med deres HUAWEI modem:
>
> > cello ~ # cat /etc/ppp/chat-tre
> > TIMEOUT 30
> > ECHO ON
> > ABORT '\nBUSY\r'
> > ABORT '\nERROR\r'
> > ABORT '\nNO ANSWER\r'
> > ABORT '\nNO DIALTONE\r'
> > ABORT '\nRINGING\r\n\r\nRINGING\r'
> > '' '\rATz'
> > OK '\rATE0V1&D2&C1S0=0+IFC=2,2'
> > OK '\rAT+cgdcont=1,"IP","bredband.tre.dk"'
> > OK '\rATD*99***1#'
> > CONNECT ''
>
> > cello ~ # cat /etc/ppp/peers/tre
> > connect '/usr/sbin/chat -v -f /etc/ppp/chat-tre'
> > noauth
> > defaultroute
> > usepeerdns
> > /dev/ttyUSB0
> > 115200
>
> Tak for input Glad

>
> Hvis jeg sletter den sidste del "bredband.tre.dk" fra nedenstående
> linie, mon det så ikke spiller med telmore Glad

>
> OK '\rAT+cgdcont=1,"IP","bredband.tre.dk"'
>
> /Magnus
> Der nok skal melde tilbage hvis det virker Glad

Jeg ændrede bredband.tre.dk til internet... og nu virker det

/Magnus

Søg

Reklame

Statistik

Spørgsmål :	177558
Tips :	31968
Nyheder :	719565
Indlæg :	6408924
Brugere :	218888

Månedens bedste

Årets bedste

Sidste års bedste