---

Hej,

Jeg prøver at få en Lan2Lan tunnel op at køre mellem en Cisco VPN3005 og en
ZyWall 10 - men har lidt problemer:

958 11/30/2004 10:28:20.340 SEV=4 AUTH/22 RPT=763
User [80.160.xxx.102] Group [80.160.xxx.102] connected, Session Type:
IPSec/LAN-
to-LAN

960 11/30/2004 10:28:20.340 SEV=4 AUTH/84 RPT=439
LAN-to-LAN tunnel to headend device 80.160.xxx.102 connected

961 11/30/2004 10:28:20.340 SEV=4 IKE/119 RPT=816 80.160.xxx.102
Group [80.160.xxx.102]
PHASE 1 COMPLETED

962 11/30/2004 10:28:20.350 SEV=5 IKE/35 RPT=417 80.160.xxx.102
Group [80.160.xxx.102]
Received remote IP Proxy Subnet data in ID Payload:
Address 192.168.155.0, Mask 255.255.255.0, Protocol 0, Port 0

965 11/30/2004 10:28:20.350 SEV=5 IKE/24 RPT=357 80.160.xxx.102
Group [80.160.xxx.102]
Received local Proxy Host data in ID Payload:
Address 192.168.1.166, Protocol 0, Port 0

968 11/30/2004 10:28:20.350 SEV=5 IKE/66 RPT=698 80.160.xxx.102
Group [80.160.xxx.102]
IKE Remote Peer configured for SA: L2L: Site Location

970 11/30/2004 10:28:20.350 SEV=4 IKE/0 RPT=431 80.160.xxx.102
Group [80.160.xxx.102]
All IPSec SA proposals found unacceptable!

971 11/30/2004 10:28:20.350 SEV=4 IKEDBG/97 RPT=391 80.160.xxx.102
Group [80.160.xxx.102]
QM FSM error (P2 struct &0x3a7f030, mess id 0xf88b84e3)!

972 11/30/2004 10:28:20.360 SEV=4 AUTH/23 RPT=436 80.160.xxx.102
User [80.160.172.102] Group [80.160.xxx.102] disconnected: duration: 0:00:00

973 11/30/2004 10:28:20.360 SEV=4 AUTH/85 RPT=436
LAN-to-LAN tunnel to headend device 80.160.xxx.102 disconnected: duration:
0:00:00

Hvor kan problemet være ? Jeg synes jeg har forsøgt at matche alt trafik og
kryptering - men et eller an´det går jo galt et sted....

/Brian