Jeg har næsten lige installeret OpenBSD 3.2. (Er vant til FreeBSD)
Men jeg har et problem:
Den vil ikke finde min cd-rom brænder, (en PLEXTOR, CD-R PX-W4012A,
1.04) den er sat som master, og som slave har jeg en SONY, DVD-ROM
DDU1621, S2.9. Når jeg sætter dem på kablet for sig selv er der ingen
problemmer.
Hvis jeg booter med en slackware bootdisk, ingen problemmer. og hellere
ingen problemmer med Windows 2000.
Fejlen der kommer i dmesg er:
"wdc_atapi_start: not ready, st = 58"
Jeg bruger generic kernel.
Nogen der har en ide om hvad der er galt?
MVH
Troels V.
PS.
jeg mener jeg har taget alle relevante oplysninger med men bare for en
sikkerhedsskyld så kommer hele dmesg her:
OpenBSD 3.2-stable (GENERIC) #0: Sat Feb 15 02:19:09 CET 2003
root@tmandk.localnet:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.55 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 804831232 (785968K)
avail mem = 740597760 (723240K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d1) BIOS, date 04/03/02, BIOS32 rev. 0 @ 0xfb220
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf10/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xbc00
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce3 Ti 200" rev 0xa3
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 11 function 0 "Macronix PMAC 98715" rev 0x20: irq 12
address 00:80:ad:78:be:a0
dcphy0 at dc0 phy 31: internal PHY
pcib0 at pci0 dev 17 function 0 "VIA VT8233 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380021A>
wd0: 16-sector PIO, LBA, 76319MB, 16383 cyl, 16 head, 63 sec, 156301488
sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
wdc_atapi_start: not ready, st = 58
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU1621, S2.9> SCSI0
5/cdrom removable
atapiscsi0(pciide0:1:0): using PIO mode 3
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97 Audio" rev 0x40: irq 5
ac97: codec id 0x49434511 (ICEnsemble ICE1232)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask d040 ttymask d0c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
----
Time's fun when you're having flies --Kermit