---

Kan nogen her hjælpe mig med denne configuration, den virker nemlig ikke!!!

På forhånd tak.!!

ISP Tele DK
Produkter er Pro@access 128/512



version 12.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
!
!
!
!
!
ip subnet-zero
no ip source-route
no ip finger
ip name-server XXX.XXX.XXX.XXX
ip name-server XXX.XXX.XXX.XXX
!
!
!
process-max-time 200
!
interface Loopback0
ip address XXX.XXX.XXX.XXX 255.255.255.255
no ip directed-broadcast
ip nat outside
!
interface Ethernet0
ip address 192.168.0.91 255.255.255.0
ip access-group 101 in
no ip redirects
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface ATM0
no ip address
no ip directed-broadcast
atm vc-per-vp 4096
no atm ilmi-keepalive
!
interface ATM0.101 point-to-point
ip unnumbered Loopback0
ip access-group 121 in
no ip directed-broadcast
ip nat outside
pvc 0/101
encapsulation aal5snap
!
!
ip nat inside source list 40 interface Loopback0 overload
ip nat inside source static 192.168.0.95 194.182.128.230 extendable
ip nat inside source static tcp 192.168.0.93 80 XXX.XXX.XXX.XXX 80 extendable
ip nat inside source static tcp 192.168.0.92 25 XXX.XXX.XXX.XXX 25 extendable
ip nat inside source static udp 192.168.0.94 53 XXX.XXX.XXX.XXX 53 extendable
ip nat inside source static tcp 192.168.0.94 53 XXX.XXX.XXX.XXX 53 extendable
ip nat inside source static tcp 192.168.0.94 21 XXX.XXX.XXX.XXX 21 extendable
ip classless
no ip http server
!
access-list 10 permit 192.168.0.0 0.0.0.255
access-list 40 permit 192.168.0.0 0.0.0.255
access-list 101 permit udp host 0.0.0.0 any eq bootps
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
access-list 121 deny ip 0.0.0.0 0.255.255.255 any
access-list 121 deny ip 127.0.0.0 0.255.255.255 any
access-list 121 deny ip 255.0.0.0 0.255.255.255 any
access-list 121 deny ip host XXX.XXX.XXX.XXX any
access-list 121 permit ip any any
no cdp run
!
line con 0
transport input none
line vty 0 4
access-class 10 in
!
end

---

"LSV" <LSV.news@kandu.dk> wrote in message
news:URWL6.9317$zv2.1324970@news010.worldonline.dk...
> Kan nogen her hjælpe mig med denne configuration, den virker nemlig
ikke!!!
>
> På forhånd tak.!!
>
> ISP Tele DK
> Produkter er Pro@access 128/512

Der er nok større chance for at du fpr kvalificeret hjælp i
news:tele.internet.adsl som er teledanmarks egen adsl-gruppe.

/Morten

---

Prøv at sammenlign konfigurationen med denne : http://www.jinx.dk/default.asp?indhold=cisco1401-single

-brug evt. denne sample config. og tilføj dine egne filtre og IP adresser.

---

!
no service finger
no service pad
service password-encryption
no service udp-small-servers
no service tcp-small-servers
no cdp run
!
enable secret XXXX
!
ip subnet-zero
no ip source-route
ip name-server 193.162.159.194
ip name-server 193.162.145.130
!
! DHCP server, only in IOS 12.0T, 12.1 or later
!
ip dhcp excluded-address 192.168.1.1 192.168.1.5
!
ip dhcp pool rfc1918
network 192.168.1.1 255.255.255.0
default-router 192.168.1.1
dns-server 194.239.134.83 193.162.153.164
!
ip nat inside source list 40 interface Loopback0 overload
!
ip nat inside source static tcp 192.168.1.4 21 <Customer IP> 21 extendable
ip nat inside source static tcp 192.168.1.4 53 <Customer IP> 53 extendable
ip nat inside source static udp 192.168.1.4 53 <Customer IP> 53 extendable
ip nat inside source static tcp 192.168.1.2 25 <Customer IP> 25 extendable
ip nat inside source static tcp 192.168.1.3 80 <Customer IP> 80 extendable
!
! Default mapping, unknown traffic mapped to 192.168.1.5, can be
! used for services on non-standard ports, eg. netgames etc.
!
ip nat inside source static 192.168.1.5 <Customer IP> extendable
!
interface Loopback0
ip address <Customer IP> 255.255.255.255
ip nat outside
!
interface Ethernet0
no shutdown
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip access-group 101 in
no ip directed-broadcast
no ip proxy-arp
no ip redirect
ntp disable
!
interface ATM0
no shutdown
!
interface ATM0.101 point
no shutdown
ip unnumbered Loopback0
ip nat outside
ip access-group 121 in
ntp disable
pvc 0/101
encapsulation aal5mux ip
!
ip classless
!
ip route 0.0.0.0 0.0.0.0 atm0.101
!
access-list 40 permit 192.168.1.0 0.0.0.255
!
access-list 121 deny ip 0.0.0.0 0.255.255.255 any
access-list 121 deny ip 127.0.0.0 0.255.255.255 any
access-list 121 deny ip 255.0.0.0 0.255.255.255 any
access-list 121 deny ip host <Customer IP> any
access-list 121 permit ip any any
!
access-list 101 permit udp host 0.0.0.0 any eq bootps
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
!
access-list 10 permit 192.168.1.0 0.0.0.255
!
line con 0
password XXXX
line vty 0 4
access-class 10 in
password XXXX
!
end

copy running-config startup-config

Reload
y

Eftersom du ikke er logget ind i systemet, kan du ikke skrive et indlæg til dette spørgsmål.

Hvis du ikke allerede er registreret, kan du gratis blive medlem, ved at trykke på "Bliv medlem" ude i menuen.