Hey Gruppe.
Jeg kører ArchLinux på mit mediecenter herhjemme som er en masterbackend
med alle tv-kort i og nogle frontends.
Efter at have kørt nogle småopdateringeer er mine kort begyndt at ikke
at kunne genkendes mere.
Skriver følgende under opstart ved udev
modprobe: Fatal: error inserting cx88_dvb
(/lib/modules/2.6.27-ARCH/kernel/drivers/media/video/cx88/cx88-dvb.ko)
No such device ???
Jamen jøses tænkte jeg og genbyggede mine drivere - hentede de seneste
og compilerede dem. Men samme problem. Uanset hvad
I min dmesg:
Linux video capture interface: v2.00
cx2388x alsa driver version 0.0.6 loaded
cx88_audio 0000:04:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68,insmod option], frontend(s): 2
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
ppdev: user-space parallel port driver
cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
tuner' 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
tuner' 1-0063: chip found @ 0xc6 (cx88[0])
lp0: using parport0 (interrupt-driven).
tveeprom 1-0050: Hauppauge model 69009, rev B2D3, serial# 3313688
tveeprom 1-0050: MAC address is 00-0D-FE-32-90-18
tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 1-0050: audio processor is CX882 (idx 33)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=69009
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input4
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88_audio 0000:04:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx88[1]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
cx88[1]: TV tuner type 63, Radio tuner type -1
usbcore: registered new interface driver hiddev
input: DELL DELL USB Keyboard as /class/input/input5
tuner' 2-0043: chip found @ 0x86 (cx88[1])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[1])
tuner' 2-0063: chip found @ 0xc6 (cx88[1])
cx88[1]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on
usb-0000:00:1d.3-1
input: DELL DELL USB Keyboard as /class/input/input6
input,hidraw1: USB HID v1.10 Device [DELL DELL USB Keyboard] on
usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
tveeprom 2-0050: Hauppauge model 69009, rev B2D3, serial# 3314422
tveeprom 2-0050: MAC address is 00-0D-FE-32-92-F6
tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 2-0050: audio processor is CX882 (idx 33)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
cx88[1]: hauppauge eeprom: model=69009
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input7
cx88[1]/1: CX88x/1: ALSA support for cx2388x boards
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:04:00.2: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 16, latency: 64, mmio:
0xf8000000
cx8802_probe() allocating 2 frontend(s)
cx8800 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 16, latency: 64, mmio:
0xf6000000
wm8775' 1-001b: chip found @ 0x36 (cx88[0])
wm8775' 2-001b: chip found @ 0x36 (cx88[1])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88[1]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:04:02.2: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
cx88[1]/2: found at 0000:04:02.2, rev: 5, irq: 18, latency: 64, mmio:
0xfc000000
cx8802_probe() allocating 2 frontend(s)
cx8800 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
cx88[1]/0: found at 0000:04:02.0, rev: 5, irq: 18, latency: 64, mmio:
0xfa000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
cx88[1]/0: registered device radio1
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]
cx88[0]/2: cx2388x based DVB/ATSC card
Invalid probe, probably not a CX24116 device
tuner-simple 1-0061: attaching existing instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216MEX MK3 Hybrid Tuner)
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -22)
cx88[0]/2: cx8802 probe failed, err = -22
cx88[1]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]
cx88[1]/2: cx2388x based DVB/ATSC card
Invalid probe, probably not a CX24116 device
tuner-simple 2-0061: attaching existing instance
tuner-simple 2-0061: type set to 63 (Philips FMD1216MEX MK3 Hybrid Tuner)
cx88[1]/2: frontend initialization failed
cx88[1]/2: dvb_register failed (err = -22)
cx88[1]/2: cx8802 probe failed, err = -22
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_dvb_probe() failed to get frontend(1)
cx88[0]/2: cx8802 probe failed, err = -19
cx88[1]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]
cx88[1]/2: cx2388x based DVB/ATSC card
cx8802_dvb_probe() failed to get frontend(1)
cx88[1]/2: cx8802 probe failed, err = -19
Hvorfor begynder den nu på at fejle på den måde?
Jeg har opdateret mine pci-id'er.
Jeg har prøvet at lave rollback til den tidligere kernel, ved at
downgrade alle de pakker der var opdateret og igen bygge det hele op fra
bunden af igen - men samme fejl uanset hvad.
Jeg kan ikke se hvad der skal til for at gøre dette rigtigt ??? Nogen
hjælp at hente nogle steder - for lige nu ved jeg så ikke hvor problemet
skulle være ?
Per
|