On Thu, 10 Jan 2008 18:40:36 +0100
asjo@koldfront.dk (Adam Sjøgren) wrote:
> On Thu, 10 Jan 2008 16:05:45 +0100, Leif wrote:
>
> > Jeg havde godt nok alligevel tænkt mig at nøjes med een partition, så jeg
> > kan godt mke2fs og mounte /dev/md0, men er det i orden eller noget rod?
>
> Det er sådan man plejer at gøre.
>
> Hvis man vil have flere plejer man at lave /dev/md0, /dev/md1, /dev/md2
> osv.
>
> (Eller man går i gang med LVM, hvis man orker).
nogen læser man-siden til mdadm og laver et partitionerbart md
"
-a, --auto{=no,yes,md,mdp,part,p}{NN}
Instruct mdadm to create the device file if needed, possibly allocating an unused minor number. "md" causes a non-partitionable array to be used. "mdp", "part" or "p" causes a partitionable array
(2.6 and later) to be used. "yes" requires the named md device to have a ’standard’ format, and the type and minor number will be determined from this. See DEVICE NAMES below.
The argument can also come immediately after "-a". e.g. "-ap".
If --auto is not given on the command line or in the config file, then the default will be --auto=yes.
If --scan is also given, then any auto= entries in the config file will override the --auto instruction given on the command line.
For partitionable arrays, mdadm will create the device file for the whole array and for the first 4 partitions. A different number of partitions can be specified at the end of this option (e.g.
--auto=p7). If the device name ends with a digit, the partition names add a ’p’, and a number, e.g. "/dev/home1p3". If there is no trailing digit, then the partition names just have a number added,
e.g. "/dev/scratch3".
If the md device name is in a ’standard’ format as described in DEVICE NAMES, then it will be created, if necessary, with the appropriate number based on that name. If the device name is not in one of
these formats, then a unused minor number will be allocated.. The minor number will be considered unused if there is no active array for that number, and there is no entry in /dev for that number and
with a non-standard name.
"
--
//Jacob Gaarde
//Dont reply to my (aparent) e-mail address. Instead Use
//e-mail : gaarde <at> mailme <dot> dk