Det nye firmware hack til conon 300d er lige blevet offentliggjort. Jeg
her ikke prøvet det endnu og vil vente et par dage så der kommer nogle
erfaringer med det men UnDutchables 0.1.0 kører fint på mit.
Det indeholder flg.
UnDutchables V0.2.3.
The Wasia firmware already contained:
- ISO 3200
- Mirror Lock up for Timer and Single shot
- Selectable pause for mirror lock up see C.Fn. 17
- FEC on JUMP button
- 'Left' button selects the autofocus mode:
AF OS - ONEShot
AF SE - AI-Servo
AF AI - AI-Focus
- the default button in delete prompt was changed from 'Cancel' to 'OK'.
So, be aware.
Now if you want to delete an image, press DEL button and then SET once. To
Cancel press any other key.
Added functionality by the UnDutchables
--------------------------------------------------
Continues Drive in Basic Mode
Jump = FEC only selectable in Creative modes
Right key = AF-Mode only selectable in Creative modes
Left key toggles AF (off-on), can be used to shoot in AI Servo mode
WB selection in Basic modes
Custom Function 1 available in basic modes enabling:
- Quality Select via SET button, this means that RAW can be set in basic
modes.
- Parameter select via SET buttons
- Menu via SET button
- Image Replay via SET button
Full menu's in Basic modes, including WB bracketing and RAW quality.
Full info screen in Basic mode
Notes:
) If the AF drive is set to AI-Servo the AF confirmation Ligh and Beep are
turned off (as done in the 10D) but now it is turned off for all ALL
modes. Please change to AI-Focus or One-Shot if AF confirmation Light and
Beep is desired.
2) You can upgrade this firmware from either the Canon 1.1.1, the Wasia
B7.1 or UnDutchables 0.1.0 version without need to reset the firmware or
the custom function values.
Jeg her lagt hele firmwaren op på min side så den kan downloades der.
http://www.stadsgaard.com/undutchables/
Jeg håber i kan bruge det.
--
M.v.h
Jens Stadsgaard
Skift invalid med cybercity.dk
Se mine billeder
http://www.stadsgaard.com/galleri/index.php