|
| Problem med at mounte Fat32-disk Fra : Jimmy |
Dato : 30-07-04 14:37 |
|
Hej
Jeg vil gerne mounte en USB-FAT32-disk på 160 GB.
FAT32 er oprettet via Partition Magic på Windows XP.
Windows kan uden videre se disken.
Når jeg forsøger at mounte den i Linux (RH 9.0) med SG-tools installeret,
sker der følgende:
[root@FW root]# sg_map -i
/dev/sg0 /dev/sda SMSC USB 2 HS-CF 1.63
/dev/sg1 /dev/scd0 LITE-ON DVDRW LDW-451S GSB4
/dev/sg2 /dev/sdb
/dev/sg3 /dev/sdc USB 2.0 Storage Device 0100
/dev/sg4 /dev/sdd
/dev/sg5 /dev/sde
/dev/sg6 /dev/sdf
/dev/sg7 /dev/sdg
[root@FW root]# fdisk /dev/sdc
The number of cylinders for this disk is set to 19929.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sdc: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 2 19929 160071660 f Win95 Ext'd (LBA)
/dev/sdc5 2 19929 160071628+ b Win95 FAT32
Command (m for help): q
[root@FW root]# mount -t vfat /dev/sdc1 /mnt/USBDISK/
[root@FW root]# ll /mnt/USBDISK/
ls: /mnt/USBDISK/?v?vâ?.*/?: Invalid or incomplete multibyte or wide
character
ls: /mnt/USBDISK/?ë?
éé..ç?/: Invalid or incomplete multibyte or wide character
total 71176660
-r-xr-xr-x 1 root root 1009927944 Jan 20 2026 ???[?-??.?$?
-rwxr-xr-x 1 root root 1145086079 Jul 6 1907 ?@? ?(??.???
-r-xr-xr-x 1 root root 1181124712 Nov 26 1909 0?bf????.???
drwxr-xr-x 0 root root 4096 Jan 5 1996 ?'?????`.0d?
dr-xr-xr-x 69 root root 4096 Dec 19 2009 ?2??????.!~?
Osv - Hvad går der galt?
Jeg har også forsøgt at partitionere den via Linux, men der kunne Windows
ikke se disken...
Mvh
Jimmy
| |
Heine Laursen (30-07-2004)
| Kommentar Fra : Heine Laursen |
Dato : 30-07-04 22:23 |
|
Den Fri, 30 Jul 2004 15:37:18 +0200. skrev Jimmy:
<snip>
> Device Boot Start End Blocks Id System
> /dev/sdc1 2 19929 160071660 f Win95 Ext'd (LBA)
> /dev/sdc5 2 19929 160071628+ b Win95 FAT32
sdc1 er en udvidet partition. Den's formål er at gøre det muligt at have
flere partitioner en 4. En slaks container om man vil for alle partitioner
over hdx4.
sdc5 er så den aktuelle partition.
> Command (m for help): q
>
> [root@FW root]# mount -t vfat /dev/sdc1 /mnt/USBDISK/ [root@FW root]# ll
> /mnt/USBDISK/
> ls: /mnt/USBDISK/?v?vâ?.*/?: Invalid or incomplete multibyte or wide
> character
> ls: /mnt/USBDISK/?ë?
> éé..ç?/: Invalid or incomplete multibyte or wide character total
> 71176660
> -r-xr-xr-x 1 root root 1009927944 Jan 20 2026 ???[?-??.?$?
> -rwxr-xr-x 1 root root 1145086079 Jul 6 1907 ?@? ?(??.???
> -r-xr-xr-x 1 root root 1181124712 Nov 26 1909 0?bf????.???
> drwxr-xr-x 0 root root 4096 Jan 5 1996 ?'?????`.0d?
> dr-xr-xr-x 69 root root 4096 Dec 19 2009 ?2??????.!~?
>
> Osv - Hvad går der galt?
Du skal mounte /dev/sdc5 ikke /dev/sdc1
--
Mvh
Heine Laursen
| |
Jimmy (30-07-2004)
| Kommentar Fra : Jimmy |
Dato : 30-07-04 22:22 |
|
"Heine Laursen" <gozar@myrealbox.com> wrote in message
news:pan.2004.07.30.21.22.40.835078@myrealbox.com...
> Den Fri, 30 Jul 2004 15:37:18 +0200. skrev Jimmy:
>
> <snip>
>
> > Device Boot Start End Blocks Id System
> > /dev/sdc1 2 19929 160071660 f Win95 Ext'd (LBA)
> > /dev/sdc5 2 19929 160071628+ b Win95 FAT32
>
> sdc1 er en udvidet partition. Den's formål er at gøre det muligt at have
> flere partitioner en 4. En slaks container om man vil for alle partitioner
> over hdx4.
OK - Cool.
> Du skal mounte /dev/sdc5 ikke /dev/sdc1
Så siger den - Not a valid block device...
Mvh
Jimmy
| |
Jimmy (01-08-2004)
| Kommentar Fra : Jimmy |
Dato : 01-08-04 18:15 |
|
"Jimmy" <nyhedsgruppe2001@SPAM.yahoo.co.uk> wrote in message
news:410abbee$0$35882$14726298@news.sunsite.dk...
>
> "Heine Laursen" <gozar@myrealbox.com> wrote in message
> news:pan.2004.07.30.21.22.40.835078@myrealbox.com...
> > Den Fri, 30 Jul 2004 15:37:18 +0200. skrev Jimmy:
> >
> > Du skal mounte /dev/sdc5 ikke /dev/sdc1
>
>
> Så siger den - Not a valid block device...
Mørkeligt - nu virker det fint.
Takker,
Jimmy
| |
|
|