> Lad os se din apache konfigurationsfil (typisk httpd.conf (den med
> alle dine <Virtualhost> i)).
Den kommer her. Det er den opsætning der default følger med SuSE
installationen, med mine virtual hosts tilføjet.
Mvh.
Sune Kristensen
httpd.conf:
#### httpd.conf -- Apache HTTP server configuration file
##
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:
http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /usr/local/httpd/conf/srm.conf and then /usr/local/httpd/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as
a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default'
server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerType is either inetd, or standalone. Inetd mode is only supported
on
# Unix platforms.
#
ServerType standalone
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:
http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/usr/local/httpd"
#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/subsys/httpd/httpd.accept.lock
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid
#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know
because
# this file will be created when you run Apache) then you *must* ensure
that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard
#
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have
the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 1
MaxSpareServers 1
#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 1
#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
#
# The following Modules are loaded when the according package has been
installed
# on your system. The Variables are defined in /sbin/init.d/apache and
control
# which modules are dynamically loaded
#
<IfDefine PHP>
LoadModule php3_module /usr/lib/apache/libphp3.so
</IfDefine>
<IfDefine PHP4>
LoadModule php4_module /usr/lib/apache/libphp4.so
</IfDefine>
<IfDefine PERL>
LoadModule perl_module /usr/lib/apache/libperl.so
</IfDefine>
<IfDefine DAV>
LoadModule dav_module /usr/lib/apache/libdav.so
</IfDefine>
<IfDefine BACKHAND>
LoadModule backhand_module /usr/lib/apache/mod_backhand.so
</IfDefine>
<IfDefine SSL>
LoadModule ssl_module /usr/lib/apache/libssl.so
LoadModule sxnet_module /usr/lib/apache/mod_sxnet.so
</IfDefine>
<IfDefine SAP_CGI>
LoadModule fastcgi_module /usr/lib/apache/mod_fastcgi_sap.so
</IfDefine>
<IfDefine MODULES>
#LoadModule allowdev_module /usr/lib/apache/mod_allowdev.so
LoadModule cookie_auth_module /usr/lib/apache/mod_auth_cookie.so
LoadModule cookie_file_access_module /usr/lib/apache/mod_auth_cookie_file.so
LoadModule external_auth_module /usr/lib/apache/mod_auth_external.so
LoadModule inst_auth_module /usr/lib/apache/mod_auth_inst.so
LoadModule auth_system_module /usr/lib/apache/mod_auth_system.so
LoadModule eaccess_module /usr/lib/apache/mod_eaccess.so
LoadModule bandwidth_module /usr/lib/apache/mod_bandwidth.so
LoadModule cache_module /usr/lib/apache/libcache.so
LoadModule urlcount_module /usr/lib/apache/mod_urlcount.so
LoadModule disallow_id_module /usr/lib/apache/mod_disallow_id.so
LoadModule lock_module /usr/lib/apache/mod_lock.so
LoadModule peephole_module /usr/lib/apache/mod_peephole.so
LoadModule put_module /usr/lib/apache/mod_put.so
LoadModule qs2ssi_module /usr/lib/apache/mod_qs2ssi.so
LoadModule session_module /usr/lib/apache/mod_session.so
LoadModule fastcgi_module /usr/lib/apache/mod_fastcgi.so
LoadModule cvs_module /usr/lib/apache/mod_cvs.so
LoadModule roaming_module /usr/lib/apache/mod_roaming.so
LoadModule w3c_ip_forwarding_module /usr/lib/apache/mod_ip_forwarding.so
LoadModule macro_module /usr/lib/apache/mod_macro.so
LoadModule layout_module /usr/lib/apache/mod_layout.so
LoadModule cgisock_module /usr/lib/apache/mod_cgisock.so
LoadModule ticket_module /usr/lib/apache/mod_ticket.so
LoadModule random_module /usr/lib/apache/mod_random.so
LoadModule mysql_auth_module /usr/lib/apache/mod_auth_mysql.so
LoadModule dynvhost_module /usr/lib/apache/mod_dynvhost.so
LoadModule gzip_module /usr/lib/apache/mod_gzip.so
LoadModule throttle_module /usr/lib/apache/mod_throttle.so
</IfDefine>
<IfDefine LDAP>
LoadModule auth_ldap_module /usr/lib/apache/auth_ldap.so
</IfDefine>
<IfDefine PYTHON>
LoadModule python_module /usr/lib/apache/mod_python.so
</IfDefine>
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO
you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your
httpd
# binary.
#
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
LoadModule env_module /usr/lib/apache/mod_env.so
LoadModule define_module /usr/lib/apache/mod_define.so
LoadModule config_log_module /usr/lib/apache/mod_log_config.so
LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
LoadModule mime_module /usr/lib/apache/mod_mime.so
LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
LoadModule status_module /usr/lib/apache/mod_status.so
LoadModule info_module /usr/lib/apache/mod_info.so
LoadModule includes_module /usr/lib/apache/mod_include.so
LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
LoadModule dir_module /usr/lib/apache/mod_dir.so
LoadModule cgi_module /usr/lib/apache/mod_cgi.so
LoadModule asis_module /usr/lib/apache/mod_asis.so
LoadModule imap_module /usr/lib/apache/mod_imap.so
LoadModule action_module /usr/lib/apache/mod_actions.so
LoadModule speling_module /usr/lib/apache/mod_speling.so
LoadModule userdir_module /usr/lib/apache/mod_userdir.so
LoadModule alias_module /usr/lib/apache/mod_alias.so
LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
LoadModule access_module /usr/lib/apache/mod_access.so
LoadModule auth_module /usr/lib/apache/mod_auth.so
LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
LoadModule digest_module /usr/lib/apache/mod_digest.so
LoadModule proxy_module /usr/lib/apache/libproxy.so
LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
LoadModule expires_module /usr/lib/apache/mod_expires.so
LoadModule headers_module /usr/lib/apache/mod_headers.so
LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
<IfDefine DUMMYSSL>
LoadModule ssl_module /usr/lib/apache/libssl.so
LoadModule php4_module /usr/lib/apache/libphp4.so
</IfDefine>
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_define.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine DUMMYSSL>
AddModule mod_ssl.c
</IfDefine>
#
# Again the following modules are only added to the system in case of the
accroding
# modules have been installed
#
<IfDefine PHP>
AddModule mod_php3.c
</IfDefine>
<IfDefine PHP4>
AddModule mod_php4.c
</IfDefine>
<IfDefine PERL>
AddModule mod_perl.c
</IfDefine>
<IfDefine DAV>
AddModule mod_dav.c
</IfDefine>
<IfDefine BACKHAND>
AddModule mod_backhand.c
</IfDefine>
<IfDefine SSL>
AddModule mod_ssl.c
AddModule mod_sxnet.c
</IfDefine>
<IfDefine SAP_CGI>
AddModule mod_fastcgi.c
</IfDefine>
<IfDefine MODULES>
#AddModule mod_allowdev.c
AddModule mod_auth_cookie.c
AddModule mod_auth_cookie_file.c
AddModule mod_auth_external.c
AddModule mod_auth_inst.c
AddModule mod_auth_system.c
AddModule mod_eaccess.c
AddModule mod_bandwidth.c
AddModule mod_cache.c
AddModule mod_urlcount.c
AddModule mod_disallow_id.c
AddModule mod_lock.c
AddModule mod_peephole.c
AddModule mod_put.c
AddModule mod_qs2ssi.c
AddModule mod_session.c
AddModule mod_fastcgi.c
AddModule mod_cvs.c
AddModule mod_roaming.c
AddModule mod_ip_forwarding.c
AddModule mod_macro.c
AddModule mod_auth_mysql.c
AddModule mod_layout.c
AddModule mod_cgisock.c
AddModule mod_ticket.c
AddModule mod_random.c
AddModule mod_dynvhost.c
AddModule mod_gzip.c
AddModule mod_throttle.c
</IfDefine>
<IfDefine LDAP>
AddModule auth_ldap.c
</IfDefine>
<IfDefine PYTHON>
AddModule mod_python.c
</IfDefine>
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On
#
# To enable mod_dav, add the following directive to the appropriate
# container(s) in the httpd.conf file:
#
<IfModule mod_dav.c>
DavLockDB /var/lock/DAVLock
</IfModule>
#
#
# enable the SSI execution for +x files
#
<IfModule mod_include.c>
XBitHack on
</IfModule>
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80
##
## SSL Support
##
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
##
<IfDefine SSL>
Listen 80
Listen 443
</IfDefine>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nogroup on these systems!
#
User wwwrun
Group nogroup
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin root@dakiller.dhs.org
#
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e.,
use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address
here.
# You will have to access it by its address (e.g.,
http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost.
Your
# machine always knows itself by this address. If you use Apache strictly
for
# local testing and development, you may use 127.0.0.1 as the server name.
#
ServerName dakiller.dhs.org
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/httpd/htdocs"
#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
AuthUserFile /etc/httpd/passwd
AuthGroupFile /etc/httpd/group
Options -FollowSymLinks +Multiviews
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/httpd/htdocs">
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options Indexes -FollowSymLinks +Includes MultiViews
#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride AuthConfig
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
#
# disable WebDAV by default for security reasons.
#
<IfModule mod_dav.c>
DAV Off
</IfModule>
#
# Enable server side includes (SSI) for the index.html pages, as some of the
content
# is created dynamically. Of course this should be disabled when setting up
a productive
# server.
<Files /usr/local/httpd/htdocs/index.htm*>
Options -FollowSymLinks +Includes +MultiViews
</Files>
#
# Protect the php3 test page, so it cannot be viewed from an outside system.
#
<Files test.php3>
Order deny,allow
deny from all
allow from localhost
</Files>
</Directory>
#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
DirectoryIndex index.php index.html
</IfModule>
#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
#
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
TypesConfig /etc/httpd/mime.types
</IfModule>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile /etc/httpd/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g.,
www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# The following are the Directives necessary to get mod_backhand
operational
# You wll need to add Backhand directives to any directories that you wish
# to balance.. For example, you could put the following inside a
# ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)
# <Directory ...>
# ... stuff ...
# Backhand byAge
# Backhand byRandom
# Backhand byLogWindow
# Backhand byCPU
# ... stuff ...
# </Directory>
# This will elminate servers you haven't heard from in a while
# Then randomize those remaining
# Then take the first log(n) (log base 2 of course)
# Then use the one with the highest idle CPU
<IfModule mod_backhand.c>
# UnixSocketDir is were the mod_backhand-Arriba file is stored
# (how fast your machine is) This directory must be readable and writable
# by euid of apache (nobody) Becuase the children have dropped privledges
# before they connect to UNIX domain socket in this directory.
# This directive is singular.
#
# MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT> will set
# mod_backhand to broadcast server statistics on that address advertising
# for a server on <IP ADDR> or gethostbyname(gethostname())
# MulticastStats of the form [<IP ADDR>] <MULTICAST ADDR>:<PORT>,<ttl> will
# set mod_backhand to multicast server statistics on that address
# advertising for a server on <IP ADDR> or gethostbyname(gethostname())
# This directive is singular.
#
# AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will accept
# statistics originating from that IP or IP network.
# This option can be cascaded.
UnixSocketDir /var/state/backhand
# MulticastStats 128.220.221.255:4445
# MulticastStats 225.220.221.20:4445,1
# AcceptStats 128.220.221.0/24
# This is a status of sorts. Visit it and see how valuable it is to you.
<Location "/backhand/">
SetHandler backhand-handler
</Location>
</IfModule>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/httpd/access_log common
#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent
#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no limit). The format
is
# Alias fakename realname
#
<IfModule mod_alias.c>
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in
this
# example, only "/icons/"..
#
Alias /icons/ "/usr/local/httpd/icons/"
<Directory "/usr/local/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the
client.
# The same rules about trailing "/" apply to ScriptAlias directives as
to
# Alias.
#
ScriptAlias /cgi-bin/ "/usr/local/httpd/cgi-bin/"
<IfModule mod_perl.c>
# Provide two aliases to the same cgi-bin directory,
# to see the effects of the 2 different mod_perl modes.
# for Apache::Registry Mode
ScriptAlias /perl/ "/usr/local/httpd/cgi-bin/"
# for Apache::Perlrun Mode
ScriptAlias /cgi-perl/ "/usr/local/httpd/cgi-bin/"
</IfModule>
#
# "/usr/local/httpd/cgi-bin" should be changed to whatever your
ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/httpd/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
#
# set /cgi-bin for CGI execution
#
<Location /cgi-bin>
AllowOverride None
Options +ExecCGI -Includes
SetHandler cgi-script
</Location>
#
# If mod_perl is activated, load configuration information
#
<IfModule mod_perl.c>
Perlrequire /usr/include/apache/modules/perl/startup.perl
PerlModule Apache::Registry
#
# set Apache::Registry Mode for /perl Alias
#
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
Options ExecCGI
PerlSendHeader On
</Location>
#
# set Apache::PerlRun Mode for /cgi-perl Alias
#
<Location /cgi-perl>
SetHandler perl-script
PerlHandler Apache::PerlRun
Options ExecCGI
PerlSendHeader On
</Location>
</IfModule>
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>
#
# FancyIndexing is whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
AddDescription "GZIP compressed document" .gz
AddDescription "tar archive" .tar
AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
#
ReadmeName README
HeaderName HEADER
#
# IndexIgnore is a set of filenames which directory indexing should
ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
#
# Document types.
#
<IfModule mod_mime.c>
#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz
ca es sv tw
</IfModule>
#
# AddType allows you to tweak mime.types without actually editing it, or
to
# make certain files to be certain types.
#
# For example, the PHP 3.x module (not part of the Apache distribution -
see
#
http://www.php.net) will typically use:
#
<IfModule mod_php3.c>
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
AddType application/x-httpd-php3 .phtml
</IfModule>
#
# And for PHP 4.x, use:
#
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php4
AddType application/x-httpd-php-source .phps
</IfModule>
AddType application/x-tar .tgz
AddType text/vnd.wap.wml wml
AddType text/vnd.wap.wmlscript wmls
AddType application/vnd.wap.wmlc wmlc
AddType application/vnd.wap.wmlscriptc wmlsc
Addtype image/vnd.wap.wbmp wbmp
#
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the
server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi
#
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml
#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map
#
# To enable type maps, you might want to use
#
#AddHandler type-map var
</IfModule>
# End of document types.
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta
#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using
server-side-includes.
#
# 3) external redirects
#ErrorDocument 402
http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will *not* be available to such a script.
#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>
#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers
that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
#
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
#
# Allow server status reports, with the URL of
http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
<IfDefine STATUS>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
</Location>
#
# Allow remote server configuration reports, with the URL of
#
http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
</Location>
#
# enable perl-status for mod_perl
#
<IfModule mod_perl.c>
<Location /perl-status>
SetHandler perl-script
PerlHandler Apache::Status
order deny,allow
deny from all
allow from localhost
</Location>
</IfModule>
</IfDefine>
#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the
script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403
http://phf.apache.org/phf_abuse_log.cgi
#</Location>
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via:
headers)
# Set to one of: Off | On | Full | Block
#
# ProxyVia On
#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
# CacheRoot "/var/cache/http"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry
about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at <URL:
http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
NameVirtualHost 192.168.1.3
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<VirtualHost 192.168.1.3>
ServerName
www.kwsp.dk
ServerAdmin sumo@dakiller.dhs.org
DocumentRoot /usr/local/httpd/htdocs/kwsp
ErrorLog /var/log/httpd/
www.kwsp.dk-error_log
CustomLog /var/log/httpd/
www.kwsp.dk-access_log common
</VirtualHost>
<VirtualHost 192.168.1.3>
<Directory /usr/local/httpd/htdocs/amberpolisher>
Options FollowSymLinks Indexes ExecCGI
AllowOverride None
</Directory>
RewriteEngine On
RewriteRule ^/filemanager/filedownload/([^/]+)/(.*)$
/usr/local/httpd/htdocs/amberpolisher/ezfilemanager/files/$1
[T="application/oct-stream",S=1]
RewriteRule !\.(gif|css|jpg|png)$
/usr/local/httpd/htdocs/amberpolisher/index.php
ServerName
www.amberpolisher.com
ServerAdmin sumo@dakiller.dhs.org
ServerAlias publish
DocumentRoot /usr/local/httpd/htdocs/amberpolisher
ErrorLog /var/log/httpd/
www.amberpolisher.com-error_log
CustomLog /var/log/httpd/
www.amberpolisher.com-access_log common
</VirtualHost>
<VirtualHost 192.168.1.3>
<Directory /usr/local/httpd/htdocs/amberpolisher/admin>
Options FollowSymLinks Indexes ExecCGI
AllowOverride None
</Directory>
RewriteEngine On
RewriteRule !\.(gif|css|jpg|png)$
/usr/local/httpd/htdocs/amberpolisher/admin/index.php
ServerName admin.kwsp.dk
ServerAdmin sumo@dakiller.dhs.org
ServerAlias admin.kwsp.dk
DocumentRoot /usr/local/httpd/htdocs/amberpolisher/admin
ErrorLog /var/log/httpd/admin.kwsp.dk-error_log
CustomLog /var/log/httpd/admin.kwsp.dk-access_log common
</VirtualHost>
<VirtualHost 192.168.1.3>
ServerName dm25.dhs.org
ServerAdmin sumo@dakiller.dhs.org
DocumentRoot /usr/local/httpd/htdocs/dm25
ErrorLog /var/log/httpd/dm25.dhs.org-error_log
CustomLog /var/log/httpd/dm25.dhs.org-access_log common
</VirtualHost>
#<VirtualHost _default_:*>
#</VirtualHost>
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
#
# Some MIME-types for downloading Certificates and CRLs
#
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfDefine>
<IfModule mod_ssl.c>
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shm:/var/run/ssl_scache(512000)
SSLSessionCache dbm:/var/run/ssl_scache
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex file:/var/run/ssl_mutex
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog /var/log/httpd/ssl_engine_log
SSLLogLevel info
</IfModule>
<IfDefine SSL>
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/usr/local/httpd/htdocs"
ServerName dakiller.dhs.org
ServerAdmin root@robins.suse.de
ErrorLog /var/log/httpd/error_log
TransferLog /var/log/httpd/access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine off
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXP56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/ssl.crt/server.crt
#SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
#SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/ssl.crt
#SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/ssl.crl
#SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means
that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the
user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment
variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use
this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/local/httpd/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait
for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach
where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers.
Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/httpd/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
#
# If mod_jserv is installed load the configuration directives
#
<IfDefine JSERV>
Include /etc/httpd/jserv/jserv.conf
</IfDefine>
#
# The Tomcat engine can be used as servlet runner
#
<IfDefine TOMCAT>
Include /etc/httpd/jserv/tomcat.conf
</IfDefine>
#
# If Midgard is installed load the configuration directives
#
<IfDefine MIDGARD>
Include /etc/httpd/midgard/midgard.conf
</IfDefine>
#
# If the SuSE help system is installed load the configuration directives
#
<IfDefine SUSEHELP>
Include /etc/httpd/susehelp.conf
</IfDefine>