Jeg prøver at tilføje et ekstra netkort i min FreeBSD current maskine.
(Jeg får ADSL den 10. maj, 15. maj ændrer cybercity 24h flatrate isdn til 8h
flatrate. God timing; mit abbonnement er opsagt. (Har stadig wol og en til i
standby...))
Det eksisterende kort er et D-LINK 250 isa, der efter ændring af
device.hints er blevet til ed1; det var ed0 før. (Det fungerer)
Det ny netkort er et RealTek 8029 pci.
Jeg får fejlmeddelelsen:
device_probe_and_attach: ed0 attach returned 2
Jeg har ledt i arkiverne, og kun fundet et råd med at slå pnp fra i bios'en.
Den option har jeg ikke i den gamle bios. (Det er en 60MHz dec med indbygget
SCSI)
Jeg har ikke ide-diske i maskinen.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #9: Wed Apr 4 18:49:51 CEST 2001
root@gina.neland.dk:/usr/obj/usr/src/sys/ARNOLD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 59973117 Hz
CPU: Pentium/P5 (59.97-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x515 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 117440512 (114688K bytes)
Preloaded elf kernel "kernel" at 0xc03eb000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
ncr0: <ncr 53c810 fast10 scsi> port 0xd100-0xd1ff mem 0x20000000-0x200000ff
irq 11 at device 1.0 on pci0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 6.0 (no driver attached)
ed0: <NE2000 PCI Ethernet (RealTek 8029)> irq 15 at device 7.0 on pci0
device_probe_and_attach: ed0 attach returned 2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
ed1 at port 0x340-0x35f iomem 0xd8000 irq 10 on isa0
ed1: address 00:80:c8:18:9c:c2, type NE2000 (16 bit)
^^^^^^^^^^^^^^^^^^^^^^^ D-LINK 250 ^^^^^^^^^^^^^^^^^
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip1: <PLIP network interface> on ppbus1
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isic0: <Dr.Neuhaus Niccy Go@> at port 0x200-0x201,0x202-0x203 irq 9 on isa0
isic0: passive stack unit 0
i4btrc: 2 ISDN trace device(s) attached
i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4brbch: 2 raw B channel access device(s) attached
i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1c> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [234900 x 2048 byte records]
da1 at ncr0 bus 0 target 1 lun 0
da1: <Quantum XP34300 81HB> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C)
da3 at ncr0 bus 0 target 3 lun 0
da3: <MAXTOR XT-3280 E.3> Fixed Direct Access SCSI-0 device
da3: 3.300MB/s transfers
da3: 231MB (474602 512 byte sectors: 64H 32S/T 231C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da2 at ncr0 bus 0 target 2 lun 0
da2: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 8)
da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
Leif