|
|
 | Cisco 1603 NAT
Fra : Nielsen |
Dato : 10-03-01 18:34 |
|
Hej,
Jeg natter (pat) min forbindelse fra ISP til 192.168.1.X på mit interne
netværk,
jeg har så en ekstra public adresse jeg gerne vil lave en statisk nat på så
den ude fra internettet
rammer min http server på 192.168.1.X segmentet. Hvordan laver man denne nat
/ rute ? Hvor skal
den ekstra public adresse tilføjes ?
Any help please ?
Mvh.
Kent
| |
 Jesper Skriver (10-03-2001)
| Kommentar
Fra : Jesper Skriver |
Dato : 10-03-01 19:40 |
|
On Sat, 10 Mar 2001 18:34:26 +0100, Nielsen wrote:
>
>Hej,
>Jeg natter (pat) min forbindelse fra ISP til 192.168.1.X på mit interne
>netværk, jeg har så en ekstra public adresse jeg gerne vil lave en statisk
>nat på så den ude fra internettet rammer min http server på 192.168.1.X
>segmentet. Hvordan laver man denne nat / rute ? Hvor skal den ekstra public
>adresse tilføjes ?
ip nat inside source static tcp 192.168.1.X 80 <Customer IP> 80 extendable
--
Jesper Skriver, CCIE #5456
FreeBSD committer
| |
Nielsen (10-03-2001)
| Kommentar
Fra : Nielsen |
Dato : 10-03-01 20:07 |
|
"Jesper Skriver" <jesper@wheel.dk> skrev i en meddelelse
news:slrn9akt8b.11jc.jesper@freesbee.wheel.dk...
> On Sat, 10 Mar 2001 18:34:26 +0100, Nielsen wrote:
> ip nat inside source static tcp 192.168.1.15 80 62.242.121.145 80
extendable
Hmm, det giver dette output.......
Hostname(config)#$static tcp 192.168.1.15 80 62.X.X.X 80 extendable
ip nat inside source static tcp 192.168.1.15 80 62.X.X.X 80 extendable
^
% Invalid input detected at '^' marker.
Mvh.
Kent
| |
 Jesper Skriver (10-03-2001)
| Kommentar
Fra : Jesper Skriver |
Dato : 10-03-01 21:54 |
|
On Sat, 10 Mar 2001 20:06:55 +0100, Nielsen wrote:
>
>"Jesper Skriver" <jesper@wheel.dk> skrev i en meddelelse
>news:slrn9akt8b.11jc.jesper@freesbee.wheel.dk...
>> On Sat, 10 Mar 2001 18:34:26 +0100, Nielsen wrote:
>
>> ip nat inside source static tcp 192.168.1.15 80 62.242.121.145 80
>extendable
>
>Hmm, det giver dette output.......
>
>Hostname(config)#$static tcp 192.168.1.15 80 62.X.X.X 80 extendable
>ip nat inside source static tcp 192.168.1.15 80 62.X.X.X 80 extendable
> ^
>% Invalid input detected at '^' marker.
Hvilken kode kører du ?
--
Jesper Skriver, CCIE #5456
FreeBSD committer
| |
Nielsen (11-03-2001)
| Kommentar
Fra : Nielsen |
Dato : 11-03-01 00:14 |
|
"Jesper Skriver" <jesper@wheel.dk> skrev i en meddelelse
news:slrn9al53s.13b2.jesper@freesbee.wheel.dk...
> Hvilken kode kører du ?
#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-Y-L), Version 11.3(11a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 20-Sep-99 09:46 by jjgreen
Image text-base: 0x080216A8, data-base: 0x02005000
ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc
1)
ROM: 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY DEPLOYMENT
RELEASE
SOFTWARE (fc1)
LIP15073 uptime is 5 hours, 58 minutes
System restarted by reload
System image file is "flash:y", booted via flash
cisco 1603 (68360) processor (revision C) with 1536K/512K bytes of memory.
Processor board ID 10549689, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
System/IO memory with parity disabled
7K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read ONLY)
Configuration register is 0x2102
Mvh.
Kent
| |
Martin Bilgrav (12-03-2001)
| Kommentar
Fra : Martin Bilgrav |
Dato : 12-03-01 00:05 |
|
så skal du op på 12.1
mvh
martin
"Nielsen" <nielsenNOSPAM@softhome.net> wrote in message
news:98ec32$91s$1@news.inet.tele.dk...
>
> "Jesper Skriver" <jesper@wheel.dk> skrev i en meddelelse
> news:slrn9al53s.13b2.jesper@freesbee.wheel.dk...
>
> > Hvilken kode kører du ?
>
> #sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 1600 Software (C1600-Y-L), Version 11.3(11a), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Mon 20-Sep-99 09:46 by jjgreen
> Image text-base: 0x080216A8, data-base: 0x02005000
>
> ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
SOFTWARE
> (fc
> 1)
> ROM: 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY DEPLOYMENT
> RELEASE
> SOFTWARE (fc1)
>
> LIP15073 uptime is 5 hours, 58 minutes
> System restarted by reload
> System image file is "flash:y", booted via flash
>
> cisco 1603 (68360) processor (revision C) with 1536K/512K bytes of memory.
> Processor board ID 10549689, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> Basic Rate ISDN software, Version 1.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 ISDN Basic Rate interface(s)
> System/IO memory with parity disabled
> 7K bytes of non-volatile configuration memory.
> 4096K bytes of processor board PCMCIA flash (Read ONLY)
>
> Configuration register is 0x2102
>
> Mvh.
> Kent
>
>
| |
Nielsen (12-03-2001)
| Kommentar
Fra : Nielsen |
Dato : 12-03-01 00:33 |
|
"Martin Bilgrav" <bilgrav@image.dk> skrev i en meddelelse
news:98h0bh$s95$1@news.inet.tele.dk...
> så skal du op på 12.1
Ok, hvilket nok kræver mere end de 4 MB flash mem jeg har i,
ved du hvor man kan købe noget ikke-cisco flash memory som kan bruges,
til en fornuftig pris ?
Mvh.
Kent
| |
Jesper Skriver (12-03-2001)
| Kommentar
Fra : Jesper Skriver |
Dato : 12-03-01 14:03 |
|
On Mon, 12 Mar 2001 00:05:23 +0100, Martin Bilgrav wrote:
>så skal du op på 12.1
Nej han skal ikke.
>"Nielsen" <nielsenNOSPAM@softhome.net> wrote in message
>news:98ec32$91s$1@news.inet.tele.dk...
>>
>> "Jesper Skriver" <jesper@wheel.dk> skrev i en meddelelse
>> news:slrn9al53s.13b2.jesper@freesbee.wheel.dk...
>>
>> > Hvilken kode kører du ?
>>
>> #sh ver
>> Cisco Internetwork Operating System Software
>> IOS (tm) 1600 Software (C1600-Y-L), Version 11.3(11a), RELEASE SOFTWARE (fc1)
I 11.3 skal du have et IP plus feature set for at få fuld NAT funktionalitet.
--
Jesper Skriver, CCIE #5456
FreeBSD committer
| |
|
|