Jeg har lige installeret RedHat7.0 på min PC der er samlet
af gamle stumper.
Motherboard PB6 med 2 ide og 2 ATA66
ide 0 og 1 har hver 2 små HD 1.2MB 6.3MB, 0.5MB og 0.4MB
på ATA66 sidder CD Teac 540
Innovision Migthy Banshee 3DFX grafikkort med 16Mb
Monitor IBM 2124 (OBS ikke IBM 2421, mere om det senere)
Efter installationen (7. gang er lykkens gang
kan jeg kun se 640x480@??Hz selv om min skærm kan vise 1024x768@60Hz.
Banshee 3DFX kortet bliver fundet uden besvær og autokonfigureret,
formoder jeg.
Skærmen bliver genkendt som IBM 2421 og ikke IBM2124 som jeg har.
Jeg har ingen data på min skærm og Win95 kører den som Plug n' play.
med opløsningerne 480, 600, 1024 i 8,16,24,32 bit, allesammen.
Mit spørgsmål er, hvorfor kan jeg kun køre med 640x480?
Man skulle kunne skifte opløsning med "CTL - v-ALT - + ", men der
sker ikke noget. Jeg kan slukke X11 med "CTL - v-ALT - Backspace ",
så jeg formoder at mit keyboard-layout er OK.
Med venlig hilsen
anders
outputtet fra
(forkortet, det hele kan findes her:
http://home9.inet.tele.dk/alo/Lin_prob_alo.zip)5.7k.
startx >& gemstartx.txt
ser sådan ud:
-----------------------------------------------------------
XFree86 Version 4.0.1a / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 2 August 2000
Operating System: Linux 2.2.5-22smp i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 25 16:35:20 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Voodoo Banshee (generic)"
--- klip --- keyboard config
--- klip --- pci moduler config
(--) PCI:*(0:15:0) 3Dfx Interactive Banshee rev 3, Mem @ 0xe0000000/25,
0xe2000000/25, I/O @ 0xd400/8
--- klip --- keyboard config
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 1.0.0
--- klip --- extensions config
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 1.0.0
--- klip --- mus config
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(--) Assigning device section with no busID to primary device
(--) Chipset 3dfx Banshee found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.1a, module version = 1.0.0
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(**) TDFX(0): Depth 16, (--) framebuffer bpp 16
(==) TDFX(0): RGB weight 565
(==) TDFX(0): Default visual is TrueColor
(--) TDFX(0): Chipset: "3dfx Banshee"
(--) TDFX(0): Linear framebuffer at 0xE2000000
(--) TDFX(0): MMIO registers at addr 0x8539C08
(--) TDFX(0): PIO registers at addr 0xD400
(--) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
--- MONITOR min er IBM2124 anno 1997 14"---
(II) TDFX(0): Monitor0: Using hsync value of 31.50 kHz
(II) TDFX(0): Monitor0: Using vrefresh value of 60.00 Hz
(II) TDFX(0): Clock range: 12.00 to 270.00 MHz
--- er det ikke lidt vildt ??????? ^^^^^^^^^^^^
--- og så brækker linux sig i stride strømme ---
(WW) TDFX(0): Mode "640x350" deleted (hsync out of range)
--- klip --- hele vejen op til
(WW) TDFX(0): Mode "1920x1440" deleted (bad mode
clock/interlace/doublescan)
--- klip --- og ned igen 37 linier
(--) TDFX(0): Virtual size is 640x480 (pitch 640)
--- og lander her, hvor jeg ikke gider at være ---
(**) TDFX(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(==) TDFX(0): DPI set to (75, 75)
--- klip --- så hentes moduler til X11 og prøver endelig at finde
ud af hvilken skærm det er? Men ikke min model ???
(II) TDFX(0): initializing int10
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): VESA Bios detected
(II) TDFX(0): VESA VBE DDC supported
(II) TDFX(0): Manufacturer: IBM Model: 2421 Serial#: 162425
(II) TDFX(0): Year: 1997 Week: 46
(II) TDFX(0): EDID Version: 1.1
(II) TDFX(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) TDFX(0): Sync: Separate
(II) TDFX(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20
(II) TDFX(0): Gamma: 2.84
(II) TDFX(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) TDFX(0): redX: 0.625 redY: 0.340 greenX: 0.274 greenY: 0.600
(II) TDFX(0): blueX: 0.142 blueY: 0.064 whiteX: 0.280 whiteY: 0.311
(II) TDFX(0): Supported VESA Video Modes:
(II) TDFX(0): 720x400@70Hz
(II) TDFX(0): 640x480@60Hz
(II) TDFX(0): 640x480@72Hz
(II) TDFX(0): 640x480@75Hz
(II) TDFX(0): 800x600@60Hz
(II) TDFX(0): 800x600@72Hz
(II) TDFX(0): 800x600@75Hz
(II) TDFX(0): 1024x768@60Hz
(II) TDFX(0): Manufacturer's mask: 0
(II) TDFX(0): Supported Future Video Modes:
(II) TDFX(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) TDFX(0): Monitor
(II) TDFX(0): Monitor
(II) TDFX(0): Monitor
(II) TDFX(0): Monitor
(==) TDFX(0): Write-combining range (0xe2000000,0x2000000)
(II) TDFX(0): Textures Memory 13.83 MB
(0): [drm] created "tdfx" driver at busid "PCI:0:15:0"
(0): [drm] added 4096 byte SAREA at 0xca062000
(0): [drm] mapped SAREA 0xca062000 to 0x40018000
(0): [drm] framebuffer handle = 0xe2000000
(0): [drm] added 1 reserved context for kernel
(II) TDFX(0): [drm] Registers = 0xe0000000
Created 16 visuals
(II) TDFX(0): visual configs initialized
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
5 128x128 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(0): X context handle = 0x00000001
(0): [drm] installed DRM signal handler
(0): [DRI] installation complete
(II) TDFX(0): direct rendering enabled
--- klip --- config af mus og lyd
waiting for X server to shut down (0): [drm] removed 1 reserved context
for kernel
(0): [drm] unmapping 4096 bytes of SAREA 0xca062000 at 0x40018000