"Jens Bjørn Andersen" <post@jenstryl.dk> wrote in news:3d99f735$0$96782
$edfadb0f@dspool01.news.tele.dk:
> Hej Martin
>
> Fejl 84 handler om kommunikation mellem hus og objektiv, i de fleste
> tilfælde er det objektivet det er galt med, når kameraet
> skriver Error 84.
>
Jeg fandt lige følgende vha. en hurtig søgning på Google, måske af interesse
for andre (Chuck Westfall er SVJH Manager i Canon Technical Information
Department hos Canon USA):
(
http://www.robgalbraith.com/ubb/Forum8/HTML/000003.html)
Chuck Westfall
Member
Posts: 188
From:Lake Success, NY USA
Registered: Jul 2000
posted December 06, 2000 04:37 PM
----------------------------------------------------------------------------
----
Hi, folks:
Sorry for the delayed reply. Hernia surgery has a way of putting people out
of commission for a while. The good news is, I seem to be recovering on
schedule. Here is a list of D30 error codes:
EOS D30 Error Codes
Err 09: SYSTEM
DESCRIPTION: This error occurs when the EOS D30's self-checking system
processing time has exceeded the specified limit. This error can occur when
several switches are pressed at the same time.
REMEDIAL MEASURE: Because this error is caused by abnormal operation, try
releasing the error by turning the main power switch OFF and then back ON.
If this does not solve the problem, have the EOS D30 examined by a qualified
service technician.
ERR 22: CF DRIVER
DESCRIPTION: This error occurs when image data cannot be written to the CF
card. This error can occur when the CF card is not fully seated in the
camera or if the D30 does not detect a card-ready signal within a specified
time limit or when the CF card is not usable because it has been corrupted
or physically damaged. It can also occur when the camera's battery level is
insufficient to completely write the file to the CF card.
REMEDIAL MEASURE: Use the DC Coupler or recharge the battery first. If the
error continues to occur with sufficient power available to the camera,
check that the CF card is properly inserted. If that's not the problem, then
try replacing the CF card. If that does not solve the problem, have the EOS
D30 and one of the CF cards that is causing the problem examined by a
qualified service technician.
ERR 23: NO SPACE LEFT ON THE CF CARD
DESCRIPTION: This error occurs when the CF card's free space is insufficient
for the image file that has been created. For example, when using a nearly
full CF card, if a long exposure is made with noise reduction shut off, the
file size may become larger than average, resulting in insufficient space to
write the file.
REMEDIAL MEASURE: Use a CF card with sufficient free space. If this does not
solve the problem, have the EOS D30 examined by a qualified service
technician.
ERR 50: CF FORMAT
DESCRIPTION: This error occurs when the CF card cannot be formatted in the
camera.
REMEDIAL MEASURE: Replace the CF card. If this does not solve the problem,
have the EOS D30 examined by a qualified service technician.
ERR 51: PLAY MODE
DESCRIPTION: This error occurs when the images stored on the CF card cannot
be played back in the camera.
REMEDIAL MEASURE: Replace the CF card. If this does not solve the problem,
have the EOS D30 examined by a qualified service technician.
ERR 80: SHUTTER
DESCRIPTION: This error occurs in the following conditions.
1) When the EOS D30's self-check system detects that the shutter has not
been fully charged (ready to shoot).
2) When the EOS D30's self-check system detects that the shutter operation
sequence has not been completed correctly.
3) When the built-in flash cannot be recharged after the E-TTL preflash but
before the main exposure.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch
OFF and then back ON. If this does not solve the problem, have the EOS D30
examined by a qualified service technician.
ERR 81: MIRROR
DESCRIPTION: This error occurs in the following conditions.
1) When the EOS D30's shutter release is pressed to the halfway position and
the mirror-down status cannot be verified by the EOS D30's self-checking
system.
2) When mirror up/down status cannot be detected during shutter release.
REMEDIAL MEASURE: Have the EOS D30 examined by a qualified service
technician.
ERR 82: STROBE
DESCRIPTION: This error occurs when the built-in flash cannot be charged.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch
OFF and then back ON. If this does not solve the problem, have the EOS D30
examined by a qualified service technician.
ERR 83: POP UP
DESCRIPTION: This error occurs when the built-in flash's pop-up operation
cannot be detected even after the pop-up operations have been repeated three
times.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch
OFF and then back ON. If this does not solve the problem, have the EOS D30
examined by a qualified service technician. (NOTE: The EOS D30 can be used
with an EX-series Speedlite and/or with an electronic flash connected
through the PC socket even when the built-in flash is unavailable.)
ERR 84: LENS COMMMUNICATION
DESCRIPTION: This error occurs in the following conditions.
1) When electronic communication with the lens cannot be established, after
the EOS D30 is powered ON or when the shutter button is pressed halfway.
2) When the lens diaphragm cannot be controlled during shutter release.
REMEDIAL MEASURE: Clean the electronic contacts on the lens with a clean,
soft, dry cloth and check the mount interface switch on the body's lens
mount for dirt or other damage. If this does not solve the problem, try
another Canon EF lens or have the EOS D30 examined by a qualified service
technician.
###
--
Regards / Med venlig hilsen
Kenneth
e-mail: kenneth at TRAPdarling dot dk - REMOVE TRAP
http://www.fotokritik.dk/oversigt.html?bruger=48
http://www.photo.net/photodb/user?user_id=255231