Q. I flashed with the wrong file. Is there any way to recover?
A. If your floppy drive seeks on power up and then stops after a short
period of time, you may have a change to recover. The following information
was obtained from Wim's Bios
http://www.wimsbios.com/ FAQ's
Award: The boot-block BIOS will execute an AUTOEXEC.BAT file on a bootable
diskette. Copy an Award flasher & the correct BIOS *.bin file on the floppy
and execute it automatically by putting awdflash *.bin in the AUTOEXEC.BAT
file.
AMI: The AMI boot-block BIOS will look for a AMIBOOT.ROM file on a diskette.
Copy and rename the correct BIOS file on the floppy and power up the PC. The
floppy doesn't need to be bootable. You will see the PC read the floppy,
after about 4 minutes you will hear 4 beeps, this means the transfer is
done.
Kill Power to the PC. Clear the CMOS or RTC. Reboot the PC and modify the
CMOS for your configuration.